Whether you’re installing a new lock or repairing an old one, you’ll need to know an easy peasy way  to pick a lock. There are a number of different types to choose from, including combination locks, deadbolts, pin tumblers, and rakes.

Pin tumbler locks

Whether you are new to the world of lock picking or a seasoned professional, there are a few things you need to know before you begin. First, you need to understand the basic principles of pin tumbler locks. Second, you need to know how to pick them, and third, you need to know how to do it correctly.

Most cylinder locks are designed to work with pin tumblers. The advantage of this type of lock is that it offers enough space for the stack of pins to travel. Also, the pins are held in place by springs.

The key to opening a pin tumbler lock is to use the right key. That means a key with the correct height grooves. If you use a key that is too large, the grooves won’t line up with the edge of the tumbler, and the plug won’t rotate.

how to to pick a lock

Fortunately, there are simple, inexpensive tools you can use to pick a pin tumbler lock. A tension wrench is one of them. Using a tension wrench, you will need to turn the plug in the same direction as the key you are trying to open. This will create a small ledge in the shaft of the pins.

Then, you will need to apply the right amount of torque to the wrench. If you’re not applying enough torque, the pins will bind up.

The last thing you need to do is relax and let the pins reset. You should hear a slight click when the pin falls into position.

Pin tumbler locks are the most common type of locks found on doors. You can use simple, mechanical tools or more complex electro-picking devices to pick them.

Deadbolt locks

Using a pick to open a deadbolt lock is not a very complicated process. In fact, you can use household supplies to make your own deadbolt lock pick. It’s also a good idea to practice before you start.

One of the most common household tools is a tension wrench. The tension wrench is a thin, rigid piece that can be inserted into the keyway of the lock. It works by applying light pressure in the direction of the key. It’s important to hold the tension wrench throughout the process.

See also  explain chatgpt like i'm 5

Another popular pick tool is a tooth-flossing handle. You can also make a pick from spare electrical wire or an old tooth brush. However, you may want to try a bobby pin. These are often used to open locks without keys. They have an L-shaped shape and are bent in a few places. They need to be scrubbed and scuffed a few times.

If you’re going to pick a deadbolt, you need to know how to do it correctly. To open a deadbolt, you need to start by unfastening the locking plate. Afterwards, you can remove the lock.

Depending on the type of lock you’re trying to open, you may need to apply some pressure to the screws to loosen them. You’ll also need to be careful not to bend the screws.

You can also use a rake pick to open a deadbolt. You can either push the rake all the way to the back of the lock, or you can use a small tip to penetrate the keyhole. It’s a good idea to experiment with different angles to see which one works best.

Besides a tension wrench, a bobby pin and a tooth-flossing handle, you can also use a heavy duty paperclip or a hair pin.

Combination locks

Whether you are a seasoned lock picker or a total beginner, there are a few things to remember before trying to crack a combination lock. First, you should make sure you have the proper picking tool. The most common materials used to pick a lock are plastic and metal. This is because of the high level of friction that a combination lock requires.

Secondly, you should have a good grip. This will allow you to move the body of the lock and hit the right number. In addition, you should be able to feel a slight click.

Third, you should be able to rotate the dial to the right position. If you can’t do this, you should look into getting a shimming tool. A shim is a special tool that can help you open a lock faster.

Fourth, you should be able to spin the dial around three times. This will disengage the internal locking mechanism of the lock. When you are ready to try again, you should turn the dial clockwise from the second digit.

See also  How to Make a French Toast

You should also be able to rotate the resisting dial to the correct position. When you do this, you will notice a hollow in the gear inside the lock. This will cause the shackle to click.

Finally, you should be able to turn the dial digit by digit. This is the secret of unlocking a combination lock. Once you are done, you can use a tension wrench to apply pressure to the locking mechanism.

There are a few tricks to picking a lock, such as shims and paperclips. These items can be used to open a lock in minutes. These tools are not as expensive as you might think.


Using a rake is one of the easiest ways to open a lock without a key. It’s a surprisingly effective method, and it’s easy to learn.

There are two main types of rakes, and each is used for a different lock. There are also advanced rakes, which are designed to mimic various pin height key positions. These are much easier to use than traditional rakes.

Bogota rakes are the most powerful. They can manipulate several pins at once. They are especially useful for locks with varying heights. They are made with rounded and polished peaks.

There are also scrubbing rakes. These rakes are designed to reduce friction and bounce the pins to the shear line. This helps to set the pins quicker. The most effective scrubbing rakes strike the pins many times with each pass.

City rakes are based on Peterson’s mini ripples. They can be used with either a slow or a mild scrubbing motion. They are not very effective against tighter tolerances. They are most effective against locks with longer pins in the front.

There are other rakes, such as the snake rake. They are shorter than the Bogota, and can be used in smaller keyways. They can also be used in extreme angles.

You can also pick a lock with a standard hook held upside down. If the lock has no security pins, this is a good technique.

The most important factor to remember when picking a lock is tension. It’s not enough to just have the proper tools. A strong and legal lock is also a must. You need to use them correctly. You can apply light pressure in the key direction, or you can use the tension wrench.

See also  Easy Peasy Quick Fixes: Problems with Your IPAD

Shear line

Using a shear line is one of the most important aspects of lock picking. It allows the cylinder to rotate freely within the housing without being turned by a key. There are many variations of this technique, but all involve moving pins to a point on the cylinder where they can no longer be turned.

There are a number of different picking methods, and the best method for a particular lock will depend on the individual’s skill level and preference. While the shear line is the most important component, other techniques such as jiggling and raking can also be useful.

A rake is a pick that has a long, jagged, elongated end that can be used to manipulate multiple pins at once. This is especially useful when the lock is cooperative, as it can be a quick way to set several pins at the shear line.

A tension wrench is another useful tool that can be helpful in locating the shear line. It applies pressure to the driver pins, which can then clear the shear line.

Typically, a lock will bind in the same order. However, depending on the direction of the force, the order can change. This is the case with high security locks. This is the point at which two segments of the marker line shift in Figures 4.9 through 4.13.

The shear line is the most important part of a cylinder lock. It is the point where the bottom pin and top pin separate. The first pin to reach this point will be the one to clear it. If a lock has more than one shear line, this may be a good indication that the lock is pick resistant.

By BobJ

Related Post